During our study period, many of us don’t know the jobs that we need and might be doing in the near future if we enter into the telecom, communication field. There are various jobs which we can apply after course of study.
Please mind, I have listed the
telecom jobs only. I will mention the electronics jobs later in this page. I have listed the company where you can apply for the job listed below in here.
1. Drive Test : It is the job where entry level as well as experienced engineer apply for. It is pure communication field. In this work, couples of handset of special installed software mobile devices is provided with GPS and the signal strength of the mobile BTS (antenna) is checked and measured. The task that you have to do it to capture the signal strength of the BTS(antenna). The parameter like radio signal quality,call quality, signal to noise ratio many more. The signal of 2g,3g,4g or LTE, WiMax,CDMA,etc are measured and saved as a log file. You have to sit on the 4 wheeler vehicle and measure signal in the given area near to the BTS.
2. Site Engineer: When the BTS or the tower is made, then there are various problem like misplacing of the telecom equipment, then the site engineer command to the technician or the engineer to make or repair as according to the criteria of the telecom company. For this job one need to have large skill and knowledge and this skill is acquired by doing the job as a technician. This job is not difficult but need to have skill at first. For fresher's its difficult to have this job because as I previous explain this need to have a experience.
3. NOC/Nok operator: Pronounced as a knock. This is the entry level job.Here, noc is hub place or centralized place where the communication system of the BTS of certain area is controlled. It's a very easy job. One have to sit on the office and check the current status of the BTS like whether its antenna is working or not, whether the power is off or not ,sensor of the BTS room and many more. It is the best job suited to get experience in the field of telecommunication.
4.TSSR survey: TSSR stands fot Technical site survey report. This survey is done in the area where is is need to install the new BTS system for that area. This survey includes the feasibility study of the new site like near by power transmission system, transportation feasibility, height needed to install the antenna,and many more. This requires GPS device to track the feasibility exact point of places and the camera to capture the nearby panoramic view to study the long term feasibility of the site coverage by the BTS antenna in the long run.
5. Operation and Maintenance: Generally pronounced as O&M. This job is to incorporate with the customer and the service provide company for the maintenance needed of the telecom equipment and to maintain the network service more effective to the customer.
6. FO Engineer: FO stands for Fully Outdoor. It is the work of the microwave link. The microwave antenna is installed and commissioned with the near by microwave antenna for the smooth operation and exchange of the communication path to the near by BSC and MSC system. This also requires the experience but one can do job easily with few months training.
Don't miss this more jobs that are done at the telecom industry which many of us won't know but are essentially required.
No comments:
Post a Comment