Battery Bank and It's Importance in Telecom

Dear Members, we are now completely upgrading this blog to our own website named telecomkhabar. we are now discontinuing this blog and new content will be available in https://www.telecomkhabar.com. 
This article is now being moved to this link named Battery Bank importance in telecom. 



After successful completion of reading this post, you will learn!!!

a) Why 2V battery is used in telecom industry??
b) Do site gets down, when battery gets damaged??
c) Details of outdoor sites and indoor sites
d) Choice for no of batteries used in site??

Pic(a): Single BB of 12V each with 12 batteries

Collection and arrangement of Battery is termed as Battery Bank or shortly BB. Battery Bank consist of few minimum 4 batteries to maximum no. of batteries as required. Battery Bank in telecom industry is most common for power backup which may need during AC line faulty. Battery bank is used to store current of Photo voltaic energy, AC rectified to DC power or Diesel Generator power.

Batteries are kept in the cabinet or in the dorm as per the site location and feasibility. Cabinet is used where the site is outdoor. Outdoor site is where BBU, DCDU, battery bank,and everything equipment is kept in a closed box sealed such that no water enters into it under the open sky. Pic(a) is clear example of outdoor site where battery bank is kept in the cabinet for protection from direct sunlight, water and direct air.

For indoor site, where every equipment is kept inside the shelter or in the room, batteries are kept in the dorm. This saves the cost of the cabinet. The Pic(b) below shows the example of indoor site and battery placement in the dorm. 

Pic(b): Two BB with each 2V, 24 batteries in each bank

In the Picture above, Pic(a) consists of 16 batteries and Pic(c) consist of 48 batteries. The choice for the number of batteries on the desired site depends on the following two important reasons:

1) For the Hub site(multiple links from same site is done): more batteries with more power is installed for providing microwave link until last minute because multiple links are operated by the same site.

2) For very busy traffic areas:places where users traffic is high and need to provide continuing services, more batteries for longer power back is kept.

Most of the telecom equipment's are made to run in negative voltage because  for the protection for high voltage lightning. So the batteries are arranged to give maximum of -48V.

Don't get confused, positive terminal of battery is grounded and negative is used to give up -48v.

Batteries are arranged in series to sum up for 48V and then more batteries are connected in parallel. Parallel connections provide long lasting current for the same output. That is why more batteries are kept and connected in parallel in HUB and High Traffic sites.

Telecommunication field is crucial as communication is very important. If there is power failure then the site gets down and whole communication of the site as well the link of other site is also down. Suppose if single 2v battery get damaged, then we can replace instantly that battery but still there is -46 voltage and sites don't get down because the telecom equipment's run upto -44v. If we used battery of more voltage then if by change battery gets damaged or need to replace then the sum of voltage will gets down below 44v and the sites gets down. Due to this reasons, at least 2 parallel connections and 2v battery is mostly used.

Most common battery used are of Shoto, Agission, Northstar,   Exide etc.

If you find this post useful, please give me thumps up by like and share or if something is missing or if you want more concept, ideas and details of other telecom equipment's please leave comment in the comment section below. I will  include those topics in my coming post. Thank you